One: Product features and uses: This product is suitable for power transmission lines for fixed installations or connecting cables for mobile electrical appliances with AC rated voltages of 0.6/1KV and below. The product has the characteristics of heat radiation, cold resistance, acid and alkali resistance, corrosive gases, and waterproofing. , Cable structure is soft, easy to radiate, stable electrical performance in high temperature (alpine) environment, outstanding anti-aging performance, long service life, widely used in metallurgy, electric power, petrochemical, electronics, automobile manufacturing and other industries.

Two: product implementation standard Q/HHTZH001.1 flame retardant and fire resistance performance test implementation GB12666-90 requirements

Three: Use characteristics

1. AC rated voltage: U0/U 0.6/1KV The highest operating temperature: 180℃ The lowest ambient temperature: fixed installation -60℃

2. The cable installation temperature should not be lower than -25℃.

3. Allowable bending radius of the cable: The smallest cable is 10 times the outer diameter of the cable. Four: Basic model and name

model

product name

YGC

Silicone rubber insulated and sheathed power cable

YGCR

Silicone rubber insulated and sheathed mobile power flexible cable

YGCP

Silicone rubber insulated and sheathed copper braided shielded power cable

YGC22

Silicone rubber insulated and sheathed steel tape armored power cable

JGG

Silicone rubber insulated and sheathed installation line

JGGR

Silicone rubber insulated and sheathed mobile installation cord

JGGP

Silicone rubber insulated and sheathed copper braided shielded installation wire

JHXG

Silicone rubber insulated motor lead wire

Remarks: Add ZR before the flame-retardant silicone rubber cable model, and the copper wire in the conductor core can be tinned.

Five: Code name and meaning

Table 2

Code Meaning

Y series code (mobile flexible cable)

G Silicone rubber

C heavy

22 Steel tape armor

P braided copper shield

R stranded conductor

J Motor lead wire

Six: Main technical indicators

1. The DC resistance of the finished cable conductor (Type R) (in accordance with GB3956 regulations) refers to Table 1 and Table 2 in Appendix A.

2. The insulation resistance is not less than 100MΩ/KM at 20℃

3. The finished cable does not break down when subjected to AC 50HZ3.5KV/5min voltage test.