Executive standard: in strict accordance with the American ANSI/ISEA Z358.1-2009 standard production. product name:

Performance characteristics:

The portable eyewash completely solves the space occupation problem, and zero-space storage is the feature of this product.

It has the following characteristics:

1. It can provide professional protection in time, fast and convenient.

2. No installation requirements, can be installed or used directly according to site needs.

3. Reserve sufficient space at the water outlet to rinse the eyes and face. If necessary, use your hands to assist in the rinse. 4. The pressure wash/eyewash is made of non-toxic polyethylene, the container is equipped with a pressure relief valve, and the water flow is stable. 5. Add 3kg of purified water. The purified water should be changed and aerated every 90 days. The aerated water is pushed and pulled about 50 times (2.5 bar) by hand, which can provide continuous water flow for 15 minutes.

Instructions

1. Add water: press the handle down to the end, then rotate it counterclockwise, unscrew the inflator,

Fill the device with water and the whole valley black six-tone rising slot is aligned, push and pull the handle to start inflation 2. Inflation: align the handle positioning table with the positioning opening slot of the inflation cylinder, push and pull the handle to start inflation,

About 50 times the pressure gauge is 2.5bar, which is moderate. If the pressure is too high, the deflation valve will automatically deflate. After the inflation is completed, stagger the handle positioning table with the positioning opening slot of the inflation cylinder.

3. Flushing: When you need to rinse, press the switch button to produce water, press the switch button to push up for a long flow

Water, after flushing, push the switch button down to turn it off.

4. Adjust the spray water: rotate the nozzle counterclockwise to form a mist, and rotate the nozzle clockwise to form a column, from column to

The fog is adjustable.