Executive standard: in strict accordance with the American ANSI/ISEA Z358.1-2009 standard production. Product name: All-copper desktop mobile eyewash

Performance characteristics:

1. Material: The main body is made of copper with nickel and chromium plating on the surface

⒉. Countertop installation method, usually placed on the countertop, and can be pulled up at will in emergency use, which is convenient to use. 3. Eyewash nozzle: It is made of non-toxic polyethylene material and molded into one piece. It has filter foam and dust-proof function. The dust-proof cover above is usually dust-proof, and can be washed away by water at any time during use, and reduces the short period of sudden opening The high water pressure to avoid hurting the eyes.

4. The water control valve is made of brass and is nickel-plated. The appearance is beautiful and generous. The valve can be automatically closed and the seal is reliable.

5. Water supply hose: 1500mm long stainless steel hose is used. Technical Parameters︰

Nominal pressure

Sealing pressure

Work pressure

flow

0.4MPA

0.45MPA

0.2-0.4MPA

≥13.6L/min

Applicable conditions

Pure water at room temperature or water that meets sanitary standards. Installation Notes︰

1. Install and fix the fixed tray on the table.

⒉Pass the taper female end of the water supply hose (with rubber pad inside) through the lower part of the fixed tray and connect it to the G1/" joint of the water control valve.

3. Connect the water supply hose G1/"locking female end (with rubber pad inside) to the water supply pipe.